  |
| HomeProductsCatalog RequestsContact UsAbout UsSiteMap |
Manual Press Attachments
Manual Press Attachments 1. Adjustable Down Stop:
The Adjustable Down Stop is designed to clamp anywhere onto the ram of the press. An adjusting screw is supplied in the unit to assure accurate down stop position with every cycle. (If ordering for press models AP-810-RR, AP-810-RR-AH, T-963, T-965, or T-967, please order model #967-10.)
Model #967-10
2. Up-Stroke Limiter:
Like the Adjustable Down Stop, the Up-Stroke Limiter clamps onto the ram of the press at any position. It is designed to limit the travel of the up-stroke in order to increase press productivity. (If ordering for press models AP-810-RR, AP-810-RR-AH, T-963, T-965, or T-967, please order model #967-9.)
Model #967-9
3. Counter & Bracket:
This counter attaches to many of our manual presses and allows you to accurately track parts production.
4. Adjustable Handle Model AH:
The Left/Right Adjustable Handle Press was designed to benefit the left handed production worker, but it also can come in handy when the operator needs to hold tooling or parts with their right hand and operate the press from the left for assembly convenience and flow. The handle can be rotated on either side in 30° degree increments 360° degrees.
5. Full Stroke Lock Model FS:
Janesville Tool & Manufacturing's Full Stroke Mechanism Presses are designed to eliminate the production of inferior parts caused by incomplete pressing.
With the use of an anti-return lock system the operator cannot return the stroke before the operation is complete. (Lock is active over the whole stroke not just the last part of the stroke).
The presses are equipped with an Adjustable Down Stop (ADS), Up Stroke Limiter (USL), and a Lock Release Knob which can be used if the pressing operation needs to be aborted to avoid the making of a defective part.
This option is currently available on JT&M, Inc. manual presses (ILP-500, DT-500, AP-810, and AP-810-RR) including (AH) models. Add Suffix (-FS) to the end of the model number when ordering.
With repeat accuracy of +/-.005 the presses are ideal for small-parts production and precision assembly by installing a line of them each tooled for a specific operation.
A Retrofit Service is available for your existing ILP-500, DT-500, AP-810, and AP-810-RR Manual Presses, including (AH) models.
FULL STROKE LOCK RETROFIT SERVICE INCLUDES:
- Press Frame/Head Casting Machined
- Replacement Pinion
- Stroke Lock Mechanism
- Up Stroke Limiter (USL)
- Adjustable Down Stop (ADS)
 |
 |
 |
| Model: AP-810-FS |
Model: DT-500-FS |
Model: ILP-500-FS |
*Product specifications and pricing subject to change without notice.
|
 |
|
|
|
){kind=link}
){kind=link}