The T-960 Precision Toggle Press is rated to withstand 4000 lbs. of force. This Precision Toggle press is ideal for pressing, punching, bending, shearing and staking of light gauge stock. The toggle action of this press works exceedingly well for the crimping of multiple terminals in electronic assembly work. The operator achieves a double crimp with each stroke of the handle by setting the toggle stop to go over center. The one inch diameter precision ground ram is in direct alignment with the hole in the base, allowing the tool designer easy alignment of punch and die tooling. The basic unit is furnished with a plain ram end, however, special ram end configurations can be furnished on request. Throat clearance on the T-960 is 4-3/4" from the center line of the ram to the column, and 6" from the ground base to the underside of the column casting. This throat height can be increased by placing a riser block between the ground base and column casting.
• Arrange Press For Die Set Mtg. Add Suffix (-A)
• Die Sets
• Riser Blocks
Click here to view Accessories.
Click here to view
Dimensional Drawing
|
T-960 w/70lbs. on Handle Inches From Bottom of Stroke/Force in Pounds | |||||||||
|
| |||||||||
| .01 | .02 | .03 | .04 | .06 | .12 | .24 | .50 | .75 | 1.00 |
| 4276 | 3013 | 2453 | 2116 | 1646 | 1573 | 804 | 500 | 422 | 270 |
){kind=link}
){kind=link}